InfoPrint 6500 DBCS, Руководство пользователя

Страница: 55 / 230

55
The purpose of the Quick Setup menu is to have the items that are most
frequently changed or entered during the installation of the printer in one
location. This is not a “quick access” menu, in that the items found here will
generally only be needed during the initial setup rather than on an ongoing
basis. Only those items where input is needed to enable printing from a host
system and establish rudimentary printing parameters are included. All other
menu selections not part of this section can be left in their default state to
achieve successful printing.
Most items displayed for selection in the Quick Setup menu dynamically
change depending on which Host Interface options are installed and selected
or which active emulation is selected. Only items that are routinely selected,
modified or confirmed during initial setup will be displayed (not full menus). In
most cases, the default settings provided throughout should be sufficient to
initiate successful printing and only need to be confirmed.
Save Current
Values
Change
Power On Set
Custom Set 1*
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preload Set 5
Custom/Preload Set 6
Custom/Preload Set 7
Custom/Preload Set 8
Factory Default
Custom Set 1*
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preload Set 5
Custom/Preload Set 6
Custom/Preload Set 7
Custom/Preload Set 8
Reset
Command
Load Factory*
Load Power On
Recall
Custom Set
Factory Default*
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preload Set 5
Custom/Preload Set 6
Custom/Preload Set 7
Custom/Preload Set 8
Lighter -10
Lighter -9
Lighter -8
Lighter -7*
Lighter -6
Lighter -5
Lighter -4
Lighter -3
Lighter -2
Lighter -1
Normal
1
2
3
4
5
6
Ribbon End
Point
To cycle through the menus and its
options, press
MENU then:
To enter a menu or select menu options,
press
ENTER .
To return to a previous menu level,
press
RETURN .
To exit the configuration menus
and return to READY, press START .
Scroll/
Micro Scroll/
Micro
OR
* = Factory Default
Quick Setup Menu