Inficon HAPSITE Smart, Руководство по эксплуатации

Страница: 84 / 554

2 - 46
IP
N 07
4-
39
7-
P1
G
HAPSITE Smart Operating Manual
2.12.2 HAPSITE Backpack
The backpack is a light weight, high quality hiker’s backpack, modified to securely
mount the HAPSITE.
2.12.2.1 Adjustment of the Backpack
To adjust the backpack, proceed as follows.
1
Put on the empty backpack.
2
Tighten the hip belt.
3
Arrange the backpack so that:
 the frame’s S-curve matches the curve of your back.
 the hip belt rests on your hip bones.
 the shoulder straps come from the frame at a slight downward angle over
your shoulders.
4
Note the height and shoulder strap adjustments that need to be made to
achieve a proper fit.
HINT: Use a mirror to visually check the fit.
5
Take the backpack off.
6
If a height adjustment is needed, use the grommets and pins to move the hip
belt up or down.
7
If the spacing between the shoulder straps needs adjustment, tilt the buckles
out of their current slots and insert them in the correct slots.
8
Try on the empty pack again. Repeat as necessary to achieve a proper fit.
9
Release the locks on the two stainless steel buckles.
10
Mount the HAPSITE on the backpack.
11
Correct adjustment of the tension of the buckles permits them to slide slightly
on the HAPSITE attachment points.
12
With the HAPSITE securely clipped to the backpack, put on the backpack.
13
Tighten the hip belt and shoulder straps.
14
The weight should be carried by your hips, with the shoulder straps steadying
the load.