InCoax In:xtnd, Руководство пользователя

Страница: 16 / 46

12 Copyright © 2018 InCoax Networks AB. All rights reserved.
Confidential under NDA
3.3.3.1 Adding Modems Manually
1. Make sure that the Modem is
switched off
.
2. In the main menu, hover over MODEMS and click on OVERVIEW.
3. Click on
ADD MODEM
in the
Options
menu to the right. (See Figure 7 .)
4. Enter the MAC address of the Modem in the field MAC . The MAC address can be found on the product label
placed on the Modem .
5. In the Service & QoS , as seen in Figure 8 , set the MoCA band and frequency to the same values as the coax
port. This is to ensure that the Modem can establish a link to the intended coax port.
6. Configure other relevant parameters like VLAN, priorities, etc.
7. Click on the button Add modem to add this Modem .
8. Connect the Modem to the coaxial network and connect the power adapter.
Figure 7 — Add Modem - Basic Settings.
Figure 8
— Add Modem - Service and QoS; Switch Configuration