InCoax In:xtnd, Руководство пользователя

Страница: 37 / 46

Copyright © 2018 InCoax Networks AB. All rights reserved. 33
Confidential under NDA
In the main menu click on SETTINGS and then click on MANAGEMENT SYSTEM in the menu to the right. See
Figure 42
and
Table 17
.
Figure 42 — Settings for the Management System.
Table 17
— Description of the parameters for the Management system.
Term Value Definition
Instant CAM reporting
Report new CAM to
CLM
On/Off
Controller reports new Modem immediately to Management
System.
CLM config
IP address
IP address IP address of Management System.
Username Text string Management System SOAP username.
Password Text string Management System SOAP password.
CLM SSL Mark to enable SSL.
Port Specify the port on the computer.
Update Click to save the new configuration.
Cancel
Click to cancel the changes, and revert back to the previously
saved configuration.
Write CLC config to CLM
Write config Click to send the new Controller configuration to the CLM.
3.7.7 Basic
Identification of the Controller is mainly used when the Controller is imported into the Management System.
Hover over SETTINGS and click on BASIC . The web page is shown in
Figure 43
and the descriptions of the
parameters are found in
Table 18
.