InCoax In:xtnd Скачать руководство пользователя страница 40

Страница: 40 / 46

Confidential under NDA

Specifications

The electrical, physical and functional specifications for the In:xtnd Control | MA2.5 | 4. Please note that the
specifications will be subjected to changes.

Performance

• Based on MoCA Access 2.5 Profile D.
•

10 Gbps WAN interface.

•

2.5 Gbps throughput per MoCA port.

•

31 Modems per port.

•

MoCA Bands: A - A, A - B, A - C, A - D, A - E.

•

Frequency range: 400 - 1675 MHz.

•

RF-channel bandwidth: 100 MHz.

•

Bonded operation supporting 3, 4 or 5 RF-channels.

•

MAC Rate typically 1.5 / 2.0 / 2.5 Gbps (up to 3.0 Gbps).

•

PHY/MAC rate: up to 730 / 600 Mbps per 100 MHz RF channel.

•

Attenuation 100% link quality up to 55 dB.

•

15 dBm ± 3 dBm max. output power; automatically adjusted per Modem.

•

Configurable beacon frequency.

•

Modulation: OFDM, QAM 1024 /512 / 256 / 128 / 64 / 32 / 16 / 8, QPSK, and BPSK.

•

Multiplexing methods: TDMA/TDD.

Physical:

• 4× MoCA Access ports, individually enabled/disabled.
•

1× SFP+ port: Multi Source Agreement (MSA) compliant, SERDES – 10 Gbps data rate,

SFF8472 – Diagnostics interface.

•

1 × Management Ethernet port: 10 / 100 Mbps, configuration and statistics port.

•

RJ-45 connector supports type CAT5 UTP (as a minimum).

•

F-female connector - 3/8-UNEF32, 75 Ω.

Indicators

• Power on, Management, Trunk, Coax Link traffic, and alerts.

Dimensions

• 278 × 61 × 224 mm (W × H × D).

•

Prepared for 19” rack chassis installation.

•

Handles can be r90° for mounting directly to the wall.

•

Vertical, horizontal, or angled installation.

Weight

• 3.7 kg

Environmental

• Operating temperature: -25 °C to +50 °C.
•

Relative humidity: 20% - 80%.

•

Altitude: max. 2000 m.

•

Dynamic temperature control with cooling redundancy.

•

Abnormal operation conditions alarms.

•

Storage (non-condensing): -40 °C to +70 °C and 5% to 90% relative humidity.

•

RoHS, RoHS2, UL94-V0.

Power

• 48 VDC nominal.
•

Power consumption: normally 32 W.

•

Automatic power on after power grid failure.

InCoax recommends to use the SFP+ module MikroTik 10G S+RJ10.

Other approved SFP+ modules are: Ubiquiti 10G UDC-2;

Fiber MM

: Ubiquiti 10G UF-CoaxMM-10G;

Fiber SM

: Ubiquiti 10G UF-SM-10G, In 10G OS-SP96-3110D, Ubiquiti Bi-Di UF-SM-10G-S.

Содержание In:xtnd













































Результаты поиска

Содержание In:xtnd

Отзывы:

Похожие инструкции для In:xtnd

Бренды по названию

Популярные бренды

InCoax In:xtnd, Руководство пользователя

Результаты поиска

Содержание In:xtnd

Отзывы:

Похожие инструкции для In:xtnd

Бренды по названию

Популярные бренды