9
ENGLIS
H
3. OPERATING INSTRUCTIONS
3.1
Installation
Warning
You can severely damage the machine if it is connected to the incorrect power supply.
Before plugging in the machine, check if the local voltage is the same as the voltage
mentioned on the type plate.
Incidence of light can cause disturbing reflections in the display, resulting in reduced
readability. If necessary, change the position of the machine to improve the readability for
the operator.
3.2
Preparation
Document Feeder Trays
Note
The machine can be delivered with a tray to manually adjust the separation. However, this
tray fits in all positions, this adjustment is only possible when fitted on the lowest position
(position one).
Place the document feeder trays in position.
1. Hold the document feeder slightly inclined as
shown in the figure.
2. Place the front end of the document feeder tray
underneath the two black rollers.
3. Move the document feeder tray upwards (lifting
the black rollers), until it is possible to “hook”
the feeder into place.
4. Move the document feeder tray towards the
machine and move the hooks over the mounting
points (on both sides).
5. Let the document feeder tray rest on the
machine.