25
ENGLIS
H
• Press
to enter the document height. The
height or the ISO format of the document will be
displayed next to the relevant feeder.
- Press
to select a feeder. The selected
feeder will be highlighted.
- Press
to display a numeric keypad to
enter the exact dimension of the document.
Press
to clear the displayed dimension and
to enter a new dimension.
Dimensions can be entered in mm, inches or as standard ISO paper dimensions
(depending on installation settings).
The machine will not allow entering dimensions outer technical ranges.
Feeder 3 (top tray) can not handle documents smaller then 115 mm (4.5”), unless the
Intermediate Transport Option is installed. When Intermediate Transport is installed,
the minimum document height is 90 mm (3.5”).
• Press
to link two feeders. This function
enables to fill two adjacent feeders with the same
documents. When the first feeder is empty, the
system automatically swaps to the other feeder.
- Press
to select two adjacent feeders. The
selected feeders will be highlighted
- Press
to link two highlighted feeders.
The will be displayed between the selected
feeders.
Note
When linking two feeders, the program will automatically equal the number and format of
the documents in the selected feeders.
• Press
to enter the setting of the Daily Mail
function.
This function enables to process documents or
sets of documents, which can not be processed
automatically. The function is only available for the
top feeder. (Refer also to “Daily Mail” on page 16)
The top feeder will automatically be selected.
• Press
to enable the Daily Mail function and
press again to disable the function.
JOB 8
ESCAPE
OK
1
2
3
100
100
A4
DOCUMENT SETTINGS
CE
JOB 8
ESCAPE
OK
1
2
3
100
100
A4
DOCUMENT SETTINGS
JOB 8
ESCAPE
OK
1
2
3
100
100
A4
DOCUMENT SETTINGS
