IMS FPi4000 страница 40 Скачать руководство пользователя

Страница: 40 / 58

Document Separation

When the MaxiFeeder

is used at an automatic separation feeder, the separation is set

automatically.

The MaxiFeeder

can also be used on a feeder position with a manually adjusted

separation.
To adjust, proceed as follows:
1. Remove feeders 2 and 3.
2. Squeeze the two blue handles

and

and shift

the feeding plate

as far as possible to the

front.

3. Push knob

forward until it clicks and turn it

counterclockwise as far as possible.

4. Place a document/BRE on the feeding tray and

slide it in the machine till the leading edge is not
visible anymore.

5. Push knob

forward until it clicks and turn it

clockwise till a slight resistance is felt when
moving the document/BRE in and out the
machine.
When the resistance starts becoming to big,
turn knob

counterclockwise.

6. Pull knob

back when ready.

7. Remount feeders 2 and 3.

Feeding Documents

1. Squeeze the two blue handles

and

2. Shift the feeding plate

to the rear position.

3. Loosen the stack of documents and place them in the feeder.

BREs with flap down and leading (Top side pointing to machine).

The feeding plate assembly will be shifted up automatically (when the system starts
processing) until documents/BREs are underneath the rubber paper pullers.

Note

When filling the MaxiFeeder

, make sure that the document/BREs are positioned parallel

in relation to the feed plate to ensure correct feeding.

7.2

Intermediate Transport

This option enables the handling of smaller documents from feeder no. 3 (top tray).

This option is not possible in combination with Optical mark Recognition.

Minimum document height

Without Intermediate Transport

115 mm (4.5”)

With Intermediate Transport

90 mm (3.5”)

Содержание FPi4000



























































Результаты поиска

Содержание FPi4000

Отзывы:

Похожие инструкции для FPi4000

Бренды по названию

Популярные бренды

IMS FPi4000, Руководство по эксплуатации

Результаты поиска

Содержание FPi4000

Отзывы:

Похожие инструкции для FPi4000

Бренды по названию

Популярные бренды