24
Envelope Settings
In this screen the properties of the used envelopes
must be entered.
In the top of the screen, three selection buttons are
displayed, from which one can be selected. The
selected settings button will be highlighted yellow.
• Press
to select an envelope which is entered
in the machine with a closed flap.
• Press
to select an envelope which is entered
in the machine with an opened flap.
• Press
to set the job without inserting the documents in envelopes (no envelope
mode). This can be useful for jobs, where documents only have to be sorted and/or
folded.
• Press
to enter the dimensions of the envelope and/or the envelope flap.
A numeric keypad will be displayed to enter the applicable dimensions.
It is also possible to select ISO standard envelopes or dimensions in inches (depends on
the installation settings).
• Press
to confirm changed settings or press
to return to the previous
screen without changing settings.
Document Settings
This screen enables the setting of the document
formats and the number of documents that must be
picked from the different feeders.
• Press
to set the number of sheets for the
different feeders.
- Press
to select a feeder. The selected
feeder will be highlighted.
- Press
or
to enter the number of
sheets that must be picked from the
highlighted feeder.
When the number of documents is 0, the relevant feeder will be deselected.
JOB 8
C6/5
ESCAPE
OK
50
ENVELOPE SETTINGS
OK
ESCAPE
JOB 8
ESCAPE
OK
1
2
3
1
1
1
DOCUMENT SETTINGS
