IMS FPi4000 Скачать руководство пользователя

Страница: 14 / 58

3.6

Sealing Envelopes

Switch the envelope sealing ON or OFF.
1. Lift the handgrip to open the top cover.

2. Shift the blue handle

towards

to disable

the envelope sealing or towards

to enable

the envelop sealing.

3. Close the top cover.

When the sealing of the envelopes is enabled, the
sealing liquid reservoir must be filled.
4. Open the front cover

5. Fill the reservoir

to the “Max” level indication

with sealing liquid.

6. Close the front cover

Before starting the job, wait approximately 5
minutes for the brushes to moisten.

3.7

Fill & Start

The Fill & Start feature automatically adjusts all
machine settings.

When Fill & Start

is started, the machine will pick one sheet from each filled feeder.

The picked documents will be folded (if necessary) and inserted into an envelope.

Using Fill & Start

1. Load envelopes.
2. Make sure there is sufficient sealing liquid in the

sealing liquid reservoir. If the reservoir has just
been filled, wait approximately 5 minutes for the
brushes to moisten. See “Sealing Envelopes” on
page 14.

3. Load the documents face up and leading.

4. From the Main menu 1/2, press

Test run

other job

JOB 1

Counters

Fill & Start

Total:

MAIN MENU 1/2

Fill & Start

Содержание FPi4000



























































Результаты поиска

Содержание FPi4000

Отзывы:

Похожие инструкции для FPi4000

Бренды по названию

Популярные бренды

IMS FPi4000, Руководство по эксплуатации

Результаты поиска

Содержание FPi4000

Отзывы:

Похожие инструкции для FPi4000

Бренды по названию

Популярные бренды