12
1. Remove trays 2 and 3:
- Push the handle on the left side of the tray
down.
- Lift the tray to unhook it, and then pull it from
the feeder.
2. Push knob
B
until it clicks and stays in place,
and then turn it counterclockwise as far as
possible.
3. Lower the left side guide
A
. The feed rollers will
move up.
4. Place a document on the feeding tray.
5. Push the document, as far as possible into the
machine, without damaging it.
6. Raise the left side guide
A
until it clicks into place. The feed rollers will move down.
7. Slide the document further into the machine until it stops.
8. Turn knob
B
clockwise until a slight resistance is felt when moving the document in
and out the machine.
If you feel too much resistance, turn knob
B
counterclockwise.
9. Remove the document.
10. Pull back knob
B.
11. Place a stack of documents in the document feeding tray.
12. Fit the removed feeder trays 2 and 3 (refer to “Document Feeder Trays” on page 9).
Feeding Documents
1. Turn the left side guide
A
downwards
The feed roller will be lifted.
2. Place a stack of documents between the side guides.
3. Turn the left side guide
A
upwards.
A
B
