Speedway Reader IPJ-R1000 for UHF Gen 2 RFID
60
Table 8-16 "show logging summary" Response Parameters
Parameter Name
Format
Description
ApplicationLevel
The level at and above which application-level
logs are sent to the log database
ConfigurationLevel
Log level for configuration
MgmtLevel
Log level for management
NetworkLevel
Log level for networking
RFIDParameters
Log level for RFID parameters
RFIDSingulation
Log level for RFID singulation
RFIDAccess
Log level for RFID access
System
Log level for system
severityLevel
<Emergency|
Alert |
Critical |
Error |
Warning |
Notice |
Info |
Debug>
The syslog security level. Only logs at or above
this level will be forwarded to syslog.
A sample of the command is shown below:
> show logging summary
Status=0,'Success'
ApplicationLevel=critical
ConfigurationLevel=emergency
MgmtLevel=emergency
NetworkLevel=emergency
RFIDParameters=emergency
RFIDSingulation=emergency
RFIDAccess=emergency
System=emergency
severityLevel=warning
>
8.5.3.3.
show logging syslog Command
Format for the
show logging syslog
command takes an integer argument to specify how many log entries to display. The
command usage is shown below:
Usage: show logging syslog <eventcount>
An example command is shown below:
> show logging syslog 3
Status=0,'Success'
Event3=Aug 20 11:39:25 (none) ntpd[625]: bind() fd 4, family 2, port 123,
addr 10.0.10.231, in_classd=0 flags=1 fails: Address already in use
Event2=Aug 20 11:39:26 (none) thttpd[631]: socket :: - Address family not
supported by protocol
Event1=Aug 20 11:39:54 (none) dhclient: receive_packet failed on ixp0:
Network is down
8.5.4. show network Command
The
show network
menu contains commands to display networking parameters and statistics. All commands are single word
commands and take no arguments. Commands with their usage format are shown below, while the response parameters are
shown in Table 8-17 through Table 8-26.
