24
1.
Turn off the power, remove the battery, and wait
at least 10 minutes for the flashtube to cool.
2.
Remove the glass cover by gently pulling it off of
the flash head.
3.
Using white cotton gloves or a clean cloth,
remove the retention wire wrapped around the
top of the flashtube.
4.
With needle-nose pliers, unhook the retention
spring loop.
5.
Once the spring is unhooked, grip the base of the
flashtube on each side, and carefully pull it from
the retaining sockets.
6.
Apply firm, even pressure at the base of the
flashtube to gently push the pins of the new
flashtube into the sockets.
7.
With needle-nose pliers, hook the retention spring over and above the
flashtube.
Note:
This step can be done by hand. Make sure not to touch the flashtube
with your bare fingers.
8.
Replace the glass cover.
Replacing the Flashtube
