13
A rechargeable battery and multivoltage charger are
included with the Cruiser TTL 500.
Note:
Impact recommends fully charging the battery before
its initial use and after an extended period of inactivity
(more than two months).
To charge and then install the battery, follow these steps:
1.
Plug the AC cord into a wall outlet. The charger’s
indicator light will glow green when the charger is
receiving power.
2.
Connect the DC cord to the battery. The charger
indicator light will glow red when the battery is
charging, and green when the battery is charged.
3.
Install the battery by orienting the contacts on the inside edge of the
battery with the contacts in the battery compartment. Press it down into
the battery compartment until the locking buttons click shut.
Checking the Battery Level
When the battery is installed in the Cruiser, the remaining
charge is always displayed by the battery icon on the
LCD screen.
If the battery is not installed, check the battery level by
pressing and holding the charge indicator button. The
indicator lights will show the remaining charge.
Charging and Installing the Battery
