16
Mounting an Umbrella
1.
Loosen the umbrella locking screw, and insert the
umbrella shaft through the two mounting loops.
2.
Tighten the locking screw to secure the umbrella.
Connecting Your Camera to the
Cruiser
The Cruiser has a 3.5 mm sync input for a wired
connection to your camera or a wireless receiver
(other than the Cruiser Wireless Controller). Use the
following steps to connect your devices:
1.
Insert a 3.5 mm sync cable into the Cruiser’s sync
port.
2.
Insert the PC connector to your camera’s PC
socket.
Note:
Check you camera’s instruction manual for more
detailed information about PC sync capabilities.
Preparing for Use
(continued)
