17
1.
Loosen the locking wheel by turning it
counterclockwise.
2.
Slide the mounting foot all the way into your
camera’s hot shoe.
3.
Turn the locking wheel clockwise to tighten until
secure.
Note:
Make sure your camera has the appropriate settings. Consult the
camera’s user manual to set features for TTL and HSS modes.
Powering On and Firing a Test
1.
To power on the Cruiser, move the power switch to either AC or
battery power mode. When the Test button lights up, the Cruiser is
charged and ready to fire.
2.
Press the Test button to fire a flash.
The Test button will turn off while the Cruiser is recycling. When it lights up, the
unit is ready to fire again.
Note:
Channel and group settings from the previous session are stored in the
Cruiser’s memory. When the Cruiser is powering up, it will be set to the channel
and group that were previously selected.
Attaching the Cruiser Wireless Controller to
Your Camera
