19
3.
Press the Model button again for a modeling light power of 100%.
4.
Pressing the Model button a third time to turn the modeling light off.
Note:
The wireless remote can set modeling light power on each group
individually. Changing the modeling light options on one group will not affect the
others.
Alert Sound
Press the Sound button to toggle the sound function on or off.
When activated, the alert will sound whenever a change is made to the settings
(except flash output power). The tone is also a recycling alert and will sound
when the Cruiser is recharged and ready to fire.
In TTL mode, the tone will sound when the power requirement for a correct
exposure is greater or less than the Cruiser’s output range.
Optical Slave
The Cruiser can be used as an optical slave. To set the Cruiser to fire when it
senses the flash from another flash unit, follow these steps:
Manually adjust the flash and modeling light power (see page 20).
Press the CELL button. The Cell indicator on the LCD screen will read On to show
that the optical sensor has been activated.
Configuring the Settings
(continued)
