20
The Cruiser’s flash power output level can be set manually in 1/10-stop
increments over a 9-stop range. 10 is the full-power flash, and each stop halves
the light output.
To use the Cruiser in manual mode, follow these steps:
1.
Connect the sync cord to the Cruiser and to your camera. Follow your
camera’s instructions for using the correct camera settings for manual
exposure photography.
Note:
If the TTL icon appears onscreen while using the Cruiser Wireless
Controller, press the Mode button on the wireless controller to exit TTL
mode.
1.
Set the flash power output, and adjust the modeling light power.
2.
Set the exposure setting you want to use on your camera (check your
camera’s manual for specific instructions).
3.
Take a test exposure, and make the necessary changes to the camera or
monolight.
Tip:
For best results, use a handheld flash meter when shooting in the
manual flash mode.
Using the Cruiser in Manual Mode
