79
INS
TALL
AT
O
RE
U
TENTE
MANU
TENT
O
RE
4.3 INDOOR UNIT DATA TABLE.
- The data relating to domestic hot water performance refer to
a dynamic inlet pressure of 2 bar and an inlet temperature of
15°C; the values are measured immediately at the boiler outlet,
considering that to obtain the data declared, mixing with cold
water is required.
- * Efficiencies refer to the net calorific value.
- The weighted NO
x
value refer to the net calorific value.
Domestic hot water nominal heat input
kW (kcal/h)
28.8 (24773)
Central heating nominal heat input
kW (kcal/h)
24.6 (21194)
Minimum heat input
kW (kcal/h)
4.5 (3862)
Domestic hot water nominal heat output (useful)
kW (kcal/h)
28.3 (24295)
Central heating nominal heat output (useful)
kW (kcal/h)
24.1 (20717)
Minimum heat output (useful)
kW (kcal/h)
4.3 (3689)
*Effective thermal efficiency 80/60 Nom./Min.
%
97.8 / 95.5
*Effective thermal efficiency 50/30 Nom./Min.
%
106.1 / 106.1
*Effective thermal efficiency 40/30 Nom./Min.
%
108.2 / 108.3
Casing losses with burner On/Off (80-60°C)
%
0.34 / 0.20
Chimney losses with burner On/Off (80-60°C)
%
0.02 / 1.70
Central heating circuit max. operating pressure
bar (MPa)
3.0 (0.3)
Maximum heating temperature
°C
90
Adjustable central heating temperature (min operating field)
°C
20 - 50
Adjustable central heating temperature (max operating field)
°C
55 - 85
System expansion vessel total volume
l
5.8
Expansion vessel pre-charged pressure
bar (MPa)
1.0 (0.1)
Appliance water content
l
2.2
Head available with 1000 l/h flow rate
kPa (m H
2
O)
40.6 (4.1)
Hot water production useful heat output
kW (kcal/h)
28.3 (24295)
Domestic hot water adjustable temperature
°C
30 - 60
Domestic hot water circuit min. pressure (dynamic)
bar (MPa)
0,3 (0,03)
Domestic hot water circuit max. operating pressure
bar (MPa)
10 (1,0)
Flow rate capacity in continuous duty (∆T 30°C)
l/min
14,10
Full Indoor Unit weight
kg
35.8
Empty Indoor Unit weight
kg
33.6
Electrical connection
V/Hz
230 / 50
Nominal power absorption
A
0.60
Installed electric power
W
80
Pump absorbed power
W
41
EEI value
-
≤ 0.20 - Part. 3
Fan power absorbed power
W
87.9
Equipment electrical system protection
-
IPX5D
Max temperature of combustion products
°C
75
Max. flue overheating temperature
°C
120
Ambient operating temperature range
°C
-5 ÷ +50
Ambient operating temperature range with optional antifreeze kit
°C
-15 ÷ +50
NO
X
class
-
6
Weighted NO
X
mg/kWh
35
Weighted CO
mg/kWh
20
(**)Type of appliance
C13 - C33 - C43 - C53 - C83 - C93 - B23 - B53p
Category
II 2H3P
