46
INS
TALL
AT
O
RE
U
TENTE
MANU
TENT
O
RE
- Press the “Menu” button, select item “Time Program” from the
main switch (Ref.1 Fig. 40), then press “Time slots”.
- Once you have accessed the menu, adjust the various items
highlighted by turning the main switch. Set the value and save
it by pressing the main switch. Each time it is saved, it moves
to the next item.
- After programming, press “Confirm”.
IMPOSTA DATA E ORA
Time Program
Esc
Back
Calendar:
1
[1] 06:15 -
08:30
[3] 17:45 - 23:00
[2] 11:30 - 13:45
[4] 24:00 - 24:00
0 2 4 6 8 10 12 14 16 18 20 22 24
43
•
Area Program and DHW program.
Time ranges (Calendars
from 1 to 4) are assigned to Zone and DHW in these menus.
You can assign the calendar to a single day or to a group of days.
(single day, Monday - Friday, Saturday - Sunday, Monday - Sa-
turday, Monday - Sunday).
Therefore each day may be personalised with 4 different opera-
ting programs.
For convenient selection, the bottom part displays the graphics
of the relevant calendar being selected (Fig. 44).
IMPOSTA DATA E ORA
Program Zone
Esc
Back
Day/s:
Monday - Sunday
Calendar: 1
0 2 4 6 8 10 12 14 16 18 20 22 24
44
•
Holiday program (
).
If required, it is possible to pause sy-
stem operation for an established period. Access the “Time and
Program” menu, select “Holiday Program” and set the period
in which you wish to pause system operation. During this time,
the previously set calendars will not be taken into consideration.
The antifreeze function is still ensured during the holiday period.
IMPOSTA DATA E ORA
Holiday Program
Cancel
Confirm
DAY MONTH YEAR
Start:
02
08
2014
Stop:
23
08
2014
Enable holiday:
Yes
45
2.5 COMFORT / ECONOMY / MANUAL OPERATION.
Once the calendar is set and the relative association of days is
executed, the system operates automatically by switching from
“comfort” to “economy” according to what has been set.
• Comfort (
).
During periods in comfort mode, a relative icon
appears next to the operation mode.
• Economy (
).
During periods in economy mode, a relative
icon appears next to the operation mode.
• Manuale( ).
If the control panel was set to manage the room
temperature of the zone, if required, it is possible to change the
value manually for a determined range.
By using the control panel to manage room temperature, it is
possible to turn the main switch to change the room temperature,
and press it to confirm the change. The change is displayed by
the symbol “ ”. This change remains active until the next time
range is changed from the active calendar.
2.6 OPERATION WITH EXTERNAL PROBE (AUDAX.
DK4).
As standard, the system’s flow temperature for room central hea-
ting is managed by the external probe depending on the external
temperature measured. The operation curve can be changed only
by means of the control panel. Operation with external probe can
be deactivated as indicated in Par. 3.6.
2.7 CLOCK AND PROGRAMS.
From this menu, it is possible to set the system’s date and time as
well as the time slots for operation in comfort and economy mode
• Date and time. On first electric supply voltage from the remote
panel, or in the event of a voltage drop, you must set the date
and time. Proceed as follows.
- Press the “Menu” button (Ref.3 Fig. 40), select item “Time
Program” from the main switch (Ref.1 Fig. 40), then press
“Setting date and hour”.
- Once you have accessed the menu, adjust the various items
highlighted by turning the main switch. Set the value and save
it by pressing the main switch. Each time it is saved, it moves
to the next item.
- After programming, press “Confirm” .
SETTING DATE AND HOUR
Cancel
Confirm
DAY
MONTH
YEAR
Date:
24
Jan
2020
HOUR
MINUTE
Hour:
15
56
42
•
Time slots.
The remote panel enables you to set 4 calendars with
4 time operating slots in system comfort mode. The system will
operate in economy mode during out-of-range time of these 4
time slots.
After setting these 4 calendars it is possible to associate them to
the various days of the week and DHW function according to
one's needs.
