Imagine Videotek VTM-2400, Инструкция по установке и эксплуатации

Страница: 30 / 148

VTM-2400 Installation and Operation Handbook 12
Section 3
♦
General Operation
Terms
Pane : One quadrant in a four-quadrant screen.
Display : The output that appears on the XGA monitor.
Quad : Screen that contains four panes.
Full : Full-screen display of the selected pane (non quad).
Introduction to Operating the VTM-2400
The VTM-2400, shown in Figure 3-1 and described in Table 3-1, can display four panes on the
screen in quad mode, which provides a fixed display of waveform (lower-right), vector (lower-
left), audio (option) and alarm status (upper-left), and picture (upper-right). A sample quad
screen with the lower-right panel selected is shown in
Figure 3-2
.
Certain buttons function differently according to the selected pane. Once the pane is selected,
more detailed settings can be configured. This section focuses on the operation of the VTM-
2400 according to the selected display.
Figure 3-1. VTM-2400 Front Panel*
*NOTE : Pressing and holding some of the function buttons will activate menus for additional
functionality.
Table 3-1. Front Panel Description
Key Label Description
1
INPUTS A and B Press to select SDI input A or SDI input B.
2
REF Press to select between the internal and external reference.
3 AUDIO/ALARM Press to highlight and switch between the Audio and Alarm pane. When audio
is installed, the Audio pane is the default pane.
4 PIC Press to highlight the Picture pane.