Imagine Videotek VTM-2400, Инструкция по установке и эксплуатации, Страница: 46 / 148

General Operation
28 VTM-2400 Installation and Operation Handbook
Table 3-8. Waveform (SD-SDI) Menu Structure
Selection Selection Option
If RGB is selected (R, G, B)
If YRGB is selected (Y, R, G B)
CENTER WAVEFORM Press SETUP/ENTER
WAVEFORM SETUP Press SETUP/ENTER
Filter Selection
The filters available are:

Flat : No filtering.

Low Pass
: Selects the Low Pass filter.

Bowtie : The bowtie filter is used to check the timing relationships between the
digital components. A bowtie test signal is required.
Parade and Overlay Selections
Multiple components can be displayed in a single pane.

When PARADE is selected, the components are shown next to one another (i.e.,
Inputs Y, then C
B
, then C
R
in a YC
B
C
R
signal).

When OVERLAY is selected the components of the input signal are displayed over
each other (i.e., R over G over B in an RGB signal).
Format
When in the Format menu, select one of the display formats: YC
B
C
R
, RGB, or YRGB. The
selected YC
B
C
R
, RGB, or YRGB text is indicated with a check mark.
Blanking
The blanking selections are Blank All, SAV/EAV, and Show All.

“Blank All” displays only the active video of the input signal.

“Show SAV/EAV” displays the active video and the SAV/EAV headers of the input
signal.