Imagine Videotek VTM-2400 Скачать руководство пользователя страница 23

Страница: 23 / 148

VTM-2400 Installation and Operation Handbook

Section 2

♦

Installation

This section provides information about inspecting, installing, and configuring the VTM-2400.

Inspecting the Shipment

Before installing the VTM-2400, inspect the box and the contents. Report any damage to the
shipper and telephone the Imagine Communications Customer Service Department for
service and support (see “Service and Support” on page 4).

NOTE

: Refer to the enclosed packing sheet for the latest list of items that are supplied with the

unit.

The box contains the following:



One VTM-2400



One

VTM-2400 Installation and Operation Handbook

on CD



One 75Ω terminator



One detachable power cord



One breakout connector (for LTC/GPI)



If the audio option has been purchased, one additional audio breakout board is
supplied

Save the box and packing material for any future shipping requirements.

Содержание Videotek VTM-2400





















































































































































Результаты поиска

Содержание Videotek VTM-2400

Отзывы:

Imagine Videotek VTM-2400, Инструкция по установке и эксплуатации, Страница: 23 / 148

Результаты поиска

Содержание Videotek VTM-2400

Отзывы: