Imagine Videotek VTM-2400 Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 148

background image

Global Setup Menu Functions

VTM-2400 Installation and Operation Handbook

63



TCP/IP stack is fully compliant with RFC2500, “Internet Official Protocol Standards”



Fully compliant with the IEEE 802.3 Ethernet standard

The interface can accept a static IP address, or it can obtain an IP address dynamically from a
DHCP server. The IP Address, Subnet Mask, Gateway Address, and DHCP are programmable
from the IP Configuration menu. The settings are performed in the IP Configuration matrix
screen.

IP Address

The IP Address is used to select a static IP address (unless Dynamic Host Configuration
Protocol (DHCP) will be used). The IP address must not be the same address as another
instrument or PC on the network. Network conflicts will occur if two devices have the same IP
address. See the System Administrator to determine a static IP address that will avoid
conflicts.

Subnet Mask

The Subnet Mask is used to configure the Subnet Mask on a network if DHCP is not enabled. If
DHCP is not used to automatically detect the Subnet Mask on a network, the Subnet Mask
must be manually configured. Unlike the IP address, the Subnet Mask must be the same
Subnet Mask as the network Subnet Mask. See the System Administrator to determine the
Subnet Mask.

Gateway

The Gateway is the network address that provides access to an outside network. Use the
Gateway submenu to configure the Gateway on a network if DHCP is not enabled. If DHCP is
not used to automatically detect the Gateway on a network, the Gateway must be manually
configured. Unlike the IP address, the Gateway must be the same Gateway address as the
network Gateway address. See the System Administrator to determine the Gateway address.

DHCP

The Dynamic Host Configuration Protocol (DHCP) function is used to have the VTM-2400
automatically configure an IP Address, Subnet Mask, and Gateway every time the unit is
powered on. The IP Address is dynamic and could change each time the VTM-2400 is powered
on. DHCP Enable is set to OFF by default.

GPI Output Function

The GPI Output Function submenu is used to enable the GPI OUTPUT and determine the GPI
OUTPUT POLARITY.

Alarm GPI Output

The Alarm GPI Output submenu is used to enable the GPI output to activate upon an alarm
condition.

«
...
79
80
81
82
83
...
»

Содержание Videotek VTM-2400





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Videotek VTM-2400

Бренд: IBM Страницы: 32

Бренд: Acer Страницы: 6

Бренд: Wohler Страницы: 75

5.8" TFT LCD Wide color monitor

Бренд: Farenheit Страницы: 4

Бренд: Synergy Global Technology Страницы: 37

Бренд: Raytheon Страницы: 44

Бренд: L3 Mobile-Vision Страницы: 32

V-SENSE V8403 T10

Бренд: i3TOUCH Страницы: 32

Бренд: Comelit Страницы: 29

Бренд: Revosys Страницы: 22

Бренд: Task Force Tips Страницы: 20

Бренд: ViewSonic Страницы: 88

SyncMaster 245B, 245BW

Бренд: Samsung Страницы: 55

SyncMaster 242MP

Бренд: Samsung Страницы: 63

SyncMaster 2494LW

Бренд: Samsung Страницы: 61

Бренд: Babyfon Страницы: 26

Бренд: Dr.Frei Страницы: 162

Trinitron HMD-A240

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды