Imagine Videotek VTM-2400, Инструкция по установке и эксплуатации

Страница: 31 / 148

General Operation
VTM-2400 Installation and Operation Handbook 13
Table 3-1. Front Panel Description
Key Label Description
5 FULL Press to show a full-screen display of the selected pane.
6
VEC

Press to highlight the Vector pane.

Press and hold to access the Vector Pane menu.
7 WFM

Press to highlight the Waveform pane.

Press and hold to access the Waveform Pane menu.
8 MAG Press to cycle through the magnifications for the waveform display, either a
normal horizontal sweep or a sweep that has been horizontally magnified. The
magnifications are shown below:

Component 1H Sweep magnifications: 15.0 µS, 3.0 µS, and 1.5 µS

Component 1V Sweep magnifications:15.0 ms, 3.0 ms, 1.5 ms, and 0.6
ms
9 GAIN Press to cycle through the vertical gain of x1.00, x2.50, or x5.00 for the
waveform and vector display.
10 LINE SELECT Press to cycle the line select display to ODD, EVEN, or OFF.
11 SWEEP Press to cycle the waveform between 1H (one horizontal line of video) or 1V
(one vertical field of video).
12 ZOOM Press to cycle through the various zoom displays for the selected waveform or
vector pane or Audio (if installed). Zoom mode is indicated with “ZOOM” at the
top of the selected pane.
13
COMPONENT Press the cycle through individual components (Y, C
B
, C
R
) or (R, G, B) and
then back to the multiple component display (YC
B
C
R
or RGB). When one
component is displayed, the component LED is illuminated.
14 PRESET Press to step through and select the four preset memories. If a preset does not
exist, the Preset is skipped. Locked presets cannot be stored until they are
unlocked.
15 UP Press to step up in the Global Setup or pane menu.
16 SETUP/ENTER Press to enter the Global Setup menu or a submenu when the Global Setup or
Pane menu is displayed.
17 DOWN Press to move down in the Global Setup or Pane menu.
18
EXIT Press to exit the submenu, Pane menu, or Global Setup menu.