manualshive.com logo in svg

ILX Lightwave FPM-8200, Руководство пользователя

Поделиться
Скачать
ILX Lightwave FPM-8200 Скачать руководство пользователя страница 23

FR O N T  PA N E L  O P E R A T I O N

The FPM-8200 Front Panel

01_10

FPM-8200

 7

 

C H A P T E R  

2

Parameter Setup Control

The PARAMETER SETUP section sets gain range and wavelength response, and 
includes the zero function. You can also save and recall setup parameters, 
including gain range, wavelength, display mode, filter mode, and user calibration 
offset value.

Figure 2.2  

Parameter Setup Front Panel Controls

Gain Ranges

Press 

AUTO/MAN

 to alternately select auto-ranging or manual gain range setting. 

The AUTO indicator is illuminated in auto-ranging mode.

Gain range selection is the default function for the UP and DOWN keys when not 
enabled by another function, as described elsewhere in theParameter Setup 
Controlsection. If the AUTO indicator is on, pressing UP or DOWN turns the 
indicator off and steps one gain range.

For low level measurements, ILX Lightwave recommends stepping down the 
range as far as possible for improved resolution.

In Manual Gain Range Mode, eight different ranges may be selected by pressing 
the UP and DOWN keys.  The front panel displays µW, nW or mW

 

as appropriate. 

For more information about gain ranges, see Analog Output (BNC) on page 14.

Gain Range Display

By pressing and holding down the LOCAL/ADR button, the primary GPIB address 
is displayed as usual.  For example if the primary GPIB address is 1, the front 
panel will display "-01-". 

While simultaneously holding down the LOCAL/ADR and AUTO/MAN button, the 
front panel displays the current gain range setting.  For example, if the current 
gain range setting is 7, then the front panel will display "--7--".  The gain range can 
then be changed by continuing to hold down the LOCAL/ADR and the AUTO/MAN 
buttons and pressing the UP or DOWN button as appropriate.  The instrument 
retains the gain range mode (auto or manual) only if the range is not modified.  If  
the gain range is modified with the UP or DOWN buttons, then the instrument 
must be in manual gain range mode.

Содержание FPM-8200

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды