Event Logs
• Avoid areas with persistent motion, such as trees, blinking lights, or spinning signs, by using an
appropriate region of interest. For scenes like these it is recommended to lower the motion sensitivity
level.
Enable or Disable a Motion Detection Alert
Motion detection can be turned on and turned off when required.
Procedure 5-14 Enable or Disable a Motion Detection Alert
Step Action
1
Select
Setup
on the GUI banner to display the setup menus.
2
Select
Analytics
from the
Events and Actions
menu.
3
Select the
Motion Detection
tab.
4
Select the
Enable motion detection
check box to enable Motion Detection on the camera.
OR
Deselect the
Enable motion detection
check box to disable Motion Detection on the camera.
5
Select the sensitivity from the
Sensitivity
drop-down menu:
• Highest
• High
• Medium
• Low
• Lowest
The default setting is 'High'.
6
Select the fault (Event) action from the
Action
drop-down menu.
This Event action will be activated when motion is detected in the field of view.
See
Create an Event Action
on
Page 64
if a fault action has not yet been defined.
7
Select
Apply
to save the configuration.
- End -
Event Logs
Event Log
When events are triggered the resulting alarms are displayed in the Event Log with the following information:
•
#
- details the event index.
•
Event
- this will be listed as ‘MotionDetected’.
•
Date created
- the time and date when the motion detection was triggered.
Illustra Pro PTZ Configuration & User Guide
68
Содержание 625 PTZ 20x
Страница 1: ...Configuration User Guide Illustra Pro PTZ 30x Illustra 625 PTZ 20x 8200 1199 01 A1...
Страница 57: ...Areas OR Select Cancel End Illustra Pro PTZ Configuration User Guide 57...
Страница 132: ...Intelligent Guard Tour Illustra Pro PTZ Configuration User Guide 132...
Страница 138: ...138...
