Illustra 625 PTZ 20x, Руководство пользователя по настройке

Страница: 133 / 153

Appendix B: Physical Reboot/Reset of the Camera
It is possible for perform a physical reboot or reset to factory defaults using the reset/reboot switch located on the
camera. Refer to Figure 1-1 Reset/Reboot Switch on the Camera.
Note:
To perform a physical reboot or reset, access is required to the camera itself. If the camera is being used in an
Outdoor Housing or with the Indoor Housing Assembly, refer to the quick start guides supplied with the products
for details on how to remove the bubble and gain access to the camera.
Figure 1-1 Reset/Reboot Switch on the Camera
Rebooting the Camera Using the Reboot/Reset Switch
Perform a reboot of the camera using the reboot/reset switch.
Procedure 1-1 Reboot the Camera Using the Reboot/Reset Switch
Step Action
1 Locate the reset/reboot switch on the camera.
Refer to Figure 1-1 Reset/Reboot Switch on the Camera.
2 Press and hold the reset/reboot switch for at least 10 seconds.
3 Release the reset switch.
It may take up to 10 seconds for the camera to restart.
When the camera is restarted, it checks its functionality by performing a homing routine. During this
routine, the camera pans and then either goes to the start point of the ‘apple peel’ pattern, or if powered up
once before, to the last position in memory. Once the camera stops, it is online and ready to be accessed
and controlled.
- End -
Illustra Pro PTZ Configuration & User Guide 133