Illustra 625 PTZ 20x Скачать руководство пользователя страница 26

Страница: 26 / 153

Picture Settings

• CBR (Constant Bit Rate)

The default setting is ‘VBR’.

If VBR has been selected, VBR Quality will be enabled. Select the required

VBR Quality

from the

drop-down menu.

• Highest

• High

• Medium

• Low

• Lowest

The default setting is ‘High’.

If CBR has been selected, CBR Bit Rate will be enabled. Use the slider bar to select the

CBR Bit

Rate

The default setting is 1000.

- End -

Picture Settings

Picture Basic

Configure the Auto Focus, Auto Iris, Exposure, Wide Dynamic Range (WDR); Defog, and Enhanced Intensity
settings on the camera.

Note:

Defog, and Enhanced Intensity are only available on Illustra Pro cameras

When Auto Focus and Iris are enabled, the camera automatically compensates for scene changes that effect
focal length (focus) and light levels (iris).

Setting Auto Focus and Auto Iris

Enable or disable auto focus and auto iris.

Procedure 3-2 Enable/Disable Auto Focus and Auto Iris

Step Action

Select

Setup

on the GUI banner to display the setup menus.

Select

Picture Settings

from the

Video

menu.

Select the

Picture Basic

tab.

Select the

Auto Focus

check box to enable auto focus.

Содержание 625 PTZ 20x


























































































































































Результаты поиска

Содержание 625 PTZ 20x

Отзывы:

Бренды по названию

Популярные бренды

Illustra 625 PTZ 20x, Руководство пользователя по настройке

Результаты поиска

Содержание 625 PTZ 20x

Отзывы:

Бренды по названию

Популярные бренды