Event Download
Procedure 10-5 Configure Record Settings
Step Action
1
Select
Setup
on the GUI Banner to display the setup menus.
2
Select
Record Settings
from the
Edge Recording
menu.
3
Select
Enable Event Record
to allow the camera to create a playable video clip.
OR
Deselect
Enable Event Record
to disable the feature.
4
If
Enable Event Record
has been enabled:
a
Select the required video stream from the
Record Source
drop-down menu.
Refer to
Configure the Video Stream settings
on
Page 24
.
b
Select the Pre Event seconds from the
Pre Event (secs)
drop-down menu. Values range from 0 to
10.
The default setting is 5 seconds.
c
Select the Post Event seconds from the
Post Event (secs)
drop-down menu. Values range from 0 to
10.
The default setting is 5 seconds.
5
Select
Apply
to save.
- End -
Event Download
If an event action has record mode enabled, when it is triggered, the associated video will be logged in the event
download table. From there it can later be downloaded from a microSD Card using the specified upload protocol.
Note:
An event action must have record mode enabled to be logged and downloaded. This is configured in
Event
Actions
under the
Events and Actions
menu. Refer to
Create an Event Action
on
Page 64
.
119
Содержание 625 PTZ 20x
Страница 1: ...Configuration User Guide Illustra Pro PTZ 30x Illustra 625 PTZ 20x 8200 1199 01 A1...
Страница 57: ...Areas OR Select Cancel End Illustra Pro PTZ Configuration User Guide 57...
Страница 132: ...Intelligent Guard Tour Illustra Pro PTZ Configuration User Guide 132...
Страница 138: ...138...
