Event Actions
Editing a Event Action
Modify the details of an existing event action.
Procedure 5-9 Edit an Event Action
Step Action
1
Select
Setup
on the GUI banner to display the setup menus.
2
Select
Event Actions
from the Events and Actions menu.
3
Select an entry in the event actions list; the following can be edited:
• Name
• Record - Enable/Disable
• Email - Enable/Disable
• FTP - Enable/Disable
• Audio Playback - select the required audio clip
• PTZ Action - select the required action.
- End -
Alarms I / O
(This menu option is available only for Feature Plus cameras.)
The camera provides four alarm inputs. By connecting alarm devices, such as smoke alarms, twilight sensors, or
motion sensors, to these inputs, you can enhance the usability of your video surveillance system.
• For 15 seconds after being triggered, any additional individual input changes on that alarm source will
only be logged and not generate any other action. This is to reduce the likelihood that any oscillating
alarm source—such as a door simply vibrating in the wind—cause a series of alarms to be generated.
• Input alarms are triggered upon change of state—either from opened to closed or from closed to open.
The camera will report the current state of each input alarm (open or closed) as well as an active or
inactive status in the alarm configuration page. Active alarms will also be visible in the Event Log. Refer
to
Event Log
on
Page 68
.
• The triggering of any input alarm will affect scheduled tasks and delay them until at least 30 seconds
has passed since the last digital alarm input was triggered.
Alarm Actions
The following alarm actions can be triggered by any alarm input:
• Activate the digital output contact. This stays active until the alarm is acknowledged and cleared by
an operator.
• Send an external alarm WS-Event that includes alarm details.
• Send an external alarm via email that includes alarm detail, where to retrieve the AVI video file and
one JPEG picture of the event if recording MJPEG to local storage. (If MJPEG is not being recorded
on local storage, then no JPEG picture will be sent.)
• Send an audio file via the camera. If a speaker has been connected to the audio output on the
camera, the file can be played as the alarm is triggered.
65
Содержание 625 PTZ 20x
Страница 1: ...Configuration User Guide Illustra Pro PTZ 30x Illustra 625 PTZ 20x 8200 1199 01 A1...
Страница 57: ...Areas OR Select Cancel End Illustra Pro PTZ Configuration User Guide 57...
Страница 132: ...Intelligent Guard Tour Illustra Pro PTZ Configuration User Guide 132...
Страница 138: ...138...
