Maintenance
Maintenance
The Maintenance menu allows you to restore the camera settings to factory default, reboot the camera and apply
a firmware upgrade.
Reset
To perform a physical reset of the camera, refer to
Resetting the Camera to Factory Default Settings Using the
Reboot/Reset Switch
on
Page 134
.
Note:
Network settings, presets, patterns and sequences can be retained if required.
Procedure 9-1 Resetting the Camera
Step Action
1
Select
Setup
on the GUI banner to display the setup menus.
2
Select
Maintenance
from the
System
menu.
3
Select the
Maintenance
tab.
4
Select the
Preserve IP address
check box to retain the current network settings during the camera
reset.
OR
Deselect the
Preserve IP address
check box to restore the default networking settings.
The default setting is ‘Enabled’.
5
Select the
Preserve applications
check box to retain the current applications installed on the camera
during the camera reset.
OR
Deselect the
Preserve applications
check box to remove existing applications.
The default setting is ‘Enabled’.
6
Select the
Preserve presets, patterns and sequences
check box to retain the current presets, patterns
and sequences during the camera reset.
OR
Deselect the
Preserve presets, patterns and sequences
check box to remove existing presets,
patterns and sequences.
The default setting is ‘Enabled’.
7
Select
Reset
You will be prompted to confirm the camera reset.
8
Select
OK
to confirm. The Web GUI will display a “Camera Resetting” page with a progress bar showing
the reset progress.
When the camera is restarted it will take 2 - 3 minutes until it is online and ready to be accessed and
controlled.
OR
104
Содержание 625 PTZ 20x
Страница 1: ...Configuration User Guide Illustra Pro PTZ 30x Illustra 625 PTZ 20x 8200 1199 01 A1...
Страница 57: ...Areas OR Select Cancel End Illustra Pro PTZ Configuration User Guide 57...
Страница 132: ...Intelligent Guard Tour Illustra Pro PTZ Configuration User Guide 132...
Страница 138: ...138...
