Ikegami HDL-F3000, Руководство по эксплуатации

Страница: 44 / 70

0 6SHFLI\WKLVLWHPZKHQDPWRPORQJFDEOHLVXVHG
0 6SHFLI\WKLVLWHPZKHQDPWRPORQJFDEOHLVXVHG
0 6SHFLI\WKLVLWHPZKHQDPWRPORQJFDEOHLVXVHG
The adjustment of the CCU is required according to each cable length. When the cable length is changed after
purchase, a readjustment by our serviceman is necessary. Without a readjustment, a proper camera performance
cannot be achieved at high gain increase.
■ EXT-ND FILT LINK
6HOHFWV212))RIWKHPRGHWRFRQWUROWKH1'¿OWHUWKDWLQWHUZRUNVZLWKRQRIIRIWKHOHQVH[WHQGHU
・
2))7KH1'¿OWHULVQRWVZLWFKHGLIWKHOHQVH[WHQGHULVWXUQHGRQRII
・
21 7KH1'¿OWHUJHWVRQHOHYHOEULJKWHULIWKHOHQVH[WHQGHULVWXUQHGRQ7KH1'¿OWHUJHWVRQHOHYHOGDUNHULIWKHOHQV
extender is turned off.
When the brightest ND filter is used before the extender is turned on, the ND filter is not switched.
When the darkest ND filter is used before the extender is turned off, the ND filter is not switched.
When FILT ENABLE is input to the CTRL connector on the CCU, the ND filter is not switched automatically but
follows the ND filter control input to the CTRL connector.
When the ND filter position (order or density) is changed to other than the standard,
please do not use this function. Appropriate ND filter control is not performed for other than the standard position.
■
SYSTEM MODE
6<67(002'( 2))&DQFHOVWKHYDOXHVHWE\WKHUHPRWHFRQWUROOHUZKHQWKHUHPRWHFRQWUROOHULVGLVFRQQHFWHG:KHQWKH
remote controller is connected again, the setting returns to the state before it is disconnected.
21 0DLQWDLQVWKHYDOXHVHWE\WKHUHPRWHFRQWUROOHUHYHQLIWKHUHPRWHFRQWUROOHULVGLVFRQQHFWHG
5.4.6 MENU PAGE 6
1.
³0(183$*(´FRQWDLQVVHYHQLWHPV³',63/$<02'(´³6',0(180,;´³%$5602'(´³5(027((1*0(18´
³35(6(7),/(/2$'´³:$51,1*´DQG³,1)250$7,21´
2. To select the desired item, turn and press the MENU switch while the item is blinking. The sub menu screen of the selected item
is displayed.
3.
,IWKH0(18VZLWFKLVSUHVVHGZKLOH³(;,7´LVEOLQNLQJWKHPHQXZLOOWXUQRII
DISPLAY MODE : Selects MENUs and VF indicators that are superimposed on the video.
SDI MENU MIX : Selects MENUs for the SDI1 and SDI2 connectors and the superposition state of VF indicators.
BARS MODE : Sets the type of the color bar.
REMOTE ENG MENU : When the engineer menu is opened from the remote controller, it is turned on. When the menu
is closed, it returns to be turned off.
PRESET FILE LOAD : It is used to return to the factory setup data or the data saved by “ENGINEER SET FILE
RENEW” in the engineer menu
WARNING : Displays the monitoring information such as the input voltage, internal temperature, and cooling
fan of the camera.
INFORMATION : Displays settings on various states and environment of the camera.
MENU PAGE6
NEXT PAGE
DISPLAY MODE
SDI MENU MIX
BARS MODE
REMOTE ENG MENU OFF
PRESET FILE LOAD
WARNING
INFORMATION
EXIT
5. OPERATION 5-18