Ikegami HDL-F3000, Руководство по эксплуатации

Страница: 43 / 70

IRIS GAIN : Adjusts the sensitivity of AUTO IRIS.
IRIS SPEED : Adjusts the operation speed of AUTO IRIS.
IRIS LIMIT : Select a limit value of the iris that can be closed by AUTO IRIS. The iris can be closed up to the F
value to be selected.
LENS ADJUST : Used to adjust the combination with lenses. Normally, this item is not used.
■ DPC
START : CANCEL : Cancels the execution of defective pixel correction.
: EXECUTE : Executes defective pixel correction.
DETECT LEVEL : Adjusts the level at which defective pixel correction is executed.
[Correction Method]
1.
2Q³0(183$*(´VHOHFW³$872'3&´DQGSUHVVWKH0(18VZLWFK
2. Set “DETECT LEVEL” depending on the level of defect pixels. 10 is recommended.
3.
6HW³67$57´IRU(;(&87(
4. If any defective pixels persist, decrease the value of “DETECT LEVEL” and execute it again.
When the Detect Level setting is decreased, smaller defective pixels will be corrected accordingly. However,
correction tracks may be conspicuous because of the increased pixels to correct.
Moreover, if it is decreased excessively, an error may occur because the number of corrections is limited.
5.4.5 MENU PAGE 5
1.
³0(183$*(´FRQWDLQVIRXULWHPV³&$%/(6(/(&7´³087(02'(´³(;71'),/7/,1.´DQG³6<67(002'(´
2. To select the desired item, turn and press the MENU switch while the item is blinking. The sub menu screen of the selected item
is displayed.
3.
,IWKH0(18VZLWFKLVSUHVVHGZKLOH³(;,7´LVEOLQNLQJWKHPHQXZLOOWXUQRII
CABLE LENGTH : Select a cable compensation circuit according to the length of the camera cable to be used.
MUTE MODE : Turns on/off the adjustment mode to block the video from the camera head.
EXT-ND FILT LINK : Sets the mode to switch the ND filter interacting with the lens extender.
SYSTEM MODE : When the remote controller is disconnected, selects whether to maintain the state set via the
remote control panel.
■ CABLE LENGTH
Select a value nearest to the length of the camera cable to be used. When the length of the camera cable to be used is different from
the setting, cable compensation is not performed properly.
0 6SHFLI\WKLVLWHPZKHQDPRUVKRUWHUORQJFDEOHLVXVHG
DPC
QUIT
START
CANCEL
DETECT LEVEL 10
(CANCEL, EXECUTE)
(0〜127)
MENU PAGE5
NEXT PAGE
CABLE LENGTH
EXT-ND FILT LINK
SYSTEM MODE
EXIT
5M
OFF
OFF
(5M, 15M, 30M)
(OFF, ON)
(OFF, ON)
5-17 5. OPERATION