5
CAUTION
•
There is a crushing risk when open
ing or closing the door�
Keep your hands away from squeezing edges�
•
Set up the device in a spacious area on an even, stable,
clean, non-slip, dry and fireproof surface�
•
Secure the device with the anti-tilt device to ensure stabil-
ity while loading and unloading shelves and during opera-
tion� Ensure the anti-tilt bracket is properly fixed, in par-
ticular when the device is stacked�
•
The feet of the equipment must be clean and undamaged�
Work with the device:
WARNING
• Do not start up the device if:
- it is damaged
- cable is damaged�
• The device must have cooled down before loading/un-
loading�
• Do not move any loaded racks�
• Heavy loads can lead to tilting of the device� Observe
loading recommendations for the shelves�
• Never use the device for:
- heating food
- drying living beings
- heating room
• The device has a temperature limiter (TB) class 1 acc�
DIN 12880� This means that in case of a single failure
the device is switched off at 270°C� The temperature
may be higher for a short time in the area of the heater
and on the walls� So beware of risk of fire or explosion
of unsuitable load�
CAUTION
• The area around the air outlet nozzle can get very hot at
high operating temperatures�
Power supply/Switching off the device:
• The voltage stated on the type plate must correspond to
the mains voltage�
• The device can only be disconnected by pulling out the
mains plug�
• Socket must be earthed�
• The device will automatically restart in mode B and C fol-
lowing any interruption to the power supply�
• Protect the power cable against kinks�
• Check power cables at regular intervals for possible mate-
rial fatigue�
• Power cable should not come into contact with hot parts�
Heating:
CAUTION
• When high operating temperatures are used, the device
may get very hot, particularly at the openings at the back�
• Risk of burns caused by vapour or hot surfaces� Pay atten-
tion to the residual heat after switching off�
Accessories:
NOTICE
• Use the locking brake when using the roller frame or roller
stand�
• Safe operation is only guaranteed with the accessories de-
scribed in the “Accessories” section
• Only use IKA approved accessories!
• Use only original IKA spare parts!
• Check the device and accessories for damage before each
use� Do not use damaged components�
• Protect the device and accessories from blows and im-
pacts�
Maintenance:
• The device must only be opened by trained specialists,
even during repair� The device must be unplugged from
the power supply before opening� Live parts inside the de-
vice may still be live for some time after unplugging from
the power supply�
Dis
posal instructions:
• The device, accessories and packaging must be disposed of
in accordance with local and national regulations�
