18
Error codes
Any malfunctions during operation will be identified by an error message on the display�
Proceed as follows in such cases:
F
Switch off device using the main switch at front of the device�
F
Carry out corrective measures�
F
Restart device�
Error code
Cause
Effect
Solution
Er 03
Temperature inside device (PCB power) too high Heating off
- Switch off device and allow it to
cool down�
Er 06
Set temperature limit exceeded
Heating off
- Contact
IKA
service department�
Er 21
Safety relay does not open
Heating off
- Contact
IKA
service department�
Er 25
Heater1 error
Heating off
- Contact
IKA
service department�
Er 26
Heater2 error
Heating off
- Contact
IKA
service department�
Er 27
No internal sensor
Heating off
- Contact
IKA
service department�
If the actions described fails to resolve the fault or another error code is displayed then take one of the following steps:
- Contact the service department
- Send the device for repair, including a short description of the fault�
Accessories
USB 2.0 cable A - B
Labworldsoft
®
See more accessories on
www.ika.com.
Warranty
In accordance with
IKA
warranty conditions, the warranty
period is 24 months� For claims under the warranty please
contact your local dealer� You may also send the machine
direct to our factory, enclosing the delivery invoice and giving
reasons for the claim� You will be liable for freight costs�
The warranty does not cover worn out parts, nor does it ap-
ply to faults resulting from improper use, insufficient care or
maintenance not carried out in accordance with the instruc-
tions in this operating manual�
