13
Performing trials:
Reduce the speed if:
- the medium splashes out of the vessel
- the device is not running smoothly
- dynamic forces start to cause the device and/or the ves-
sels placed on it to move around.
• Make certain that the device is set at the lowest speed
(left hand position) before commissioning; otherwise, the
device will start to run at the speed set in last operation.
Gradually increase the speed
• After an interruption in the power supply or a mechani-
cal interruption during working process, the device will
restart automatically.
• The device can only be disconnected from the mains sup-
ply by pulling out the mains plug or the connector plug.
• The device can only be opened by technical experts, even
during repair. The device must be unplugged from the
power supply before opening. Live parts inside the device
may still be live for some time after unplugging from the
power supply.
For protection of the user:
Never touch the moving
parts during operation.
There is a crushing hazard be-
tween the moving shaking table
and the casing. Keep your hand
away from this area during operation.
There is a crushing hazard be-
tween the device and the table.
Be careful when transporting
and installing the device.
Because of the heavy weight (26
kg) of the device, at least two
persons are needed for carrying
the device.
Wear your personal protective
equipment in accordance with
the hazard category of the media
to be processed. Otherwise there is a risk from:
- splashing and evaporation of liquids
- ejection of parts
- release of toxic or combustible gases
- body parts, hair, clothing and jewelry getting caught.
Only process media that will not
react dangerously to the extra
energy produced through pro-
cessing. This also applies to any extra energy produced in
other ways, e.g. through light irradiation.
Process pathogenic materials only
in closed vessels under a suitable
fume hood. Please contact
IKA
if
you have any questions.
Beware of hazards due to:
- flammable materials
- incorrect container size
- overfilling of media
- unsafe condition of container
- glass breakage as a result of mechanical shaking power.
WARNING
DANGER
DANGER
WARNING
NOTICE
For protection of the device and accessories:
• Set up the device in a spacious area on an even, stable,
clean, non-slip, dry and fireproof surface.
• The voltage stated on the type plate must correspond to
the mains voltage.
• Removable parts must be refitted to the device to prevent
the infiltration of foreign objects, liquids etc..
• Protect the device and accessories from bump and impact.
• Avoid allowing objects to push or strike the shaking table.
The weight of the load must not
exceed 15 kg. Do not exceed the
maximum permissible shaking
weight.
• Place the vessels securely on the shaking table or on the
chosen mat.
• Firmly secure the accessories and vessels in place, other-
wise shaking vessels could be damaged or projected out.
• Position one single shaking vessel in the centre and sev-
eral shaking vessels so that they are evenly spread out.
• Always load the samples evenly on the device.
DANGER
NOTICE
CAUTION
CAUTION
CAUTION