iGuard LM530, Руководство пользователя

Страница: 60 / 80

iGuard™ LM530 Operation Manual
Version 1.0
- 55 -
Master / Slave Configuration and iGuardPayroll
Use this page to configure the iGuard as either a Master or Slave unit
9
, and to connect the
device to the iGuardPayroll cloud service.
Master/Slave Configuration
– use this page to configure iGuard as either a Master or
Slave unit.
Master Mode: In Master Mode, you can s
elect the “
E
nable iGuardPayroll Cloud Service”
to
connect to the service. A master unit can be connected to iGuardPayroll cloud services
for storing all the employee information and access logs for free.
If iGuardPayroll is enabled, the device must be associated with an iGuardPayroll user
account, which has a unique registration code. Enter the registration code here to notify
iGuardPayroll the user account the iGuard unit belongs to. The registration code is a six-
digit code and can be found in
iGuardPayroll’s ‘Device Setup’
page as follows:
9
Please refer to the section “Master / Slave Mode” on page 19 for more detail.