iGuard LM530, Руководство пользователя

Страница: 10 / 80

iGuard™ LM530 Operation Manual
Version 1.0
- 5 -
Description LCD Display
2.
After about 10 sec., the device will load the system program… iGuard System
Loading.....
3. After loading the system program, iGuard will enter the
Standby Mode and is now ready to set the date, time & the
network settings.
Wed Jan 24 12:00
ID #:_ IN
CONFIGURATION
Setting the date and time
The date and time must be properly set up so that iGuard can time stamp all the access &
time attendance records.
iGuard automatically sync its clock with the SNTP Time
Server in the internet. It can also be done manually as follow:
Description LCD Display
1. While in Standby Mode, press the Func key to enter the
Function Menu. You will be asked to enter the System
Administrator Password.
Enter Password:
_
2. Enter the System Administrator Password (default: 123).
Enter Password:
***_
3. Press the Func key to continue. The function menu will scroll
down slowly as shown.
Press 1:
Add/Update ID
:
Press 5: System
Configuration...
4. Enter 5 to select the System Configuration menu. The
current firmware version & the IP address will be momentarily
shown, followed by the current date. If necessary, enter the
new date and then press the
Func key to continue.
Ver: 6.0.1008
192.168.000.100
:
Date (M/D/Y):
01/24/2018
5. After pressing the Func key, the current time is displayed.
Enter the new time then press the Func key to continue.
Time (H:M:S):
13:24:43
6. The system will then ask for the Terminal ID, which is used to
identify the iGuard in your network. The
default ID is “iGuard”.
This ID is important especially if you have more than one unit
installed.
Terminal ID:
iGuard
Note: iGuard can keep the date & time running without power for approximately one day.