iGuard LM530, Руководство пользователя

Страница: 19 / 80

iGuard™ LM530 Operation Manual
Version 1.0
- 14 -
The Core The Tip
The core of the fingerprint containing the most minutia points is usually located opposite
the cuticle. Center the cuticle in the sensor window to maximize the number of minutia
points.
IMPORTANT : During the enrollment process, position the center of the fingerprint of the
thumb to the center of the fingerprint sensor. The center of the fingerprint contains the
most minutia points from which the fingerprint sensor can extract.
A good fingerprint
image captured during the enrollment process can significantly reduce the false-reject rate
during later verification.
Adding New User with Fingerprint
The following steps will show h
ow to register the user’s fingerprint data:-
Description LCD Display
1. While in Standby Mode, press the Func key to enter the
Function Menu. Enter the System Administrator Password
(default 123) and press
Func key, then press 1 to select
“ Add/Update ID”
menu.
By Finger/Passwd
(1/2)? _
2. Press 1
to select “By Finger”, then you will be asked to enter
the user ID.
Enter ID #:
_
3. Enter the user ID # (e.g. A02 ). The ID can be of any length
from 1 to 10 characters.
Enter ID #:
A02_
4. Press the Func key to confirm the ID #. You will be asked to
place the finger on the fingerprint scanner.
Scanning 1/2
Waiting finger..
5. Place the primary finger on the scanner for scanning.
Afterwards, you will be asked to scan this same finger again.
Press Func to
scan 2 of 2...
6. Remove the finger from the scanner and then press Func .
Then scan the same finger again for the 2
nd
time. After that,
iGuard will analyze and extract the data from the two images.
If the image quality is good, it will then ask for the secondary
finger. Otherwise, it will ask to scan the 1
st
finger again.
Analyzing...
:
Analyzing...OK
:
Press Func to
scan 2nd Finger