iGuard LM530, Руководство пользователя

Страница: 34 / 80

iGuard™ LM530 Operation Manual
Version 1.0
- 29 -
Function 0: Advanced Feature
This function contains a number of handy tools for setup and network diagnosis.
1. Ping Test
This test is analogous to the ping test in PC. It comes in handy when it is necessary to
test the connection between the iGuard and a PC, for example.
Description LCD Display
1. While in Function Menu, press 0 to select
“Advanced
Feature”
. Then you will be asked if you want to perform a
Ping Test.
Ping Test
Yes/No (1/2)? _
2. Press 1 to select YES, then you will be asked to enter the IP
address of the target device. Enter the IP address of the
target device.
IP Address:
192.168.000.123
3. Press Func to confirm. The unit will try to ping the target
device, and display the result as shown.
192.168.000.123
Ping:#1 5ms
:
192.168.000.123
Ping:#3 7ms
4. Press Backspace to return to the Standby Mode.
Thu Aug 30 13:57
ID #:_ IN
2. Reset FP Sensor (Reset Fingerprint Sensor)
In an unlikely event that the automatch feature does not work properly, it would be helpful
to reset the fingerprint sensor and re-index the automatch records as follows:
Description LCD Display
1. While in Function Menu, press 0 to select
“Advanced
Feature”. Then press
2
to skip to “Reset FP Sensor”.
Reset FP Sensor
Yes/No (1/2)? _
2. Press 1 to select YES, then the reset process will start
immediately.
Setting Up
AutoMatch 01/65
3. It will return to the Standby Mode when the process is
finished.
Thu Aug 30 13:57
ID #:_ IN