iGuard LM530, Руководство пользователя

Страница: 31 / 80

iGuard™ LM530 Operation Manual
Version 1.0
- 26 -
Description LCD Display
4. Press 2 to select NO, then the unit will take a few seconds to
prepare itself to shut down. Then it will show the message
and it is now safe to power off the unit.
It is now Safe
To Power Off...
Note : When the User Database or the Access Log are reset, all the data will be cleared
when the unit is powered up again.
Note : If it is not necessary to reset the data, the device can be shut down safely by simply
turning the power off.
Function 8: AutoMatch
Use this function to toggle the AutoMatch option between on and off for a user.
AutoMatch enables the device to identify a person without requiring the user to first
specify his user ID. This is also called 1-to-Many matching.
Following these steps to set the AutoMatch option for a user:-
Description LCD Display
1. While in Function Menu, press 8 to select
“AutoMatch”. You
will be asked to enter the user ID.
Enter ID #:
_
2. Enter the user ID (e.g., A01)
Enter ID #:
A01_
3. Press Func to confirm. You will see the acknowledge
message, and then the unit will return to Standby Mode.
ID: A01
AutoMatch Set!
:
Thu Aug 30 13:50
ID #:_ IN
After setting the AutoMatch option, the user no longer needs to enter his ID every time
when accessing the device. The user can simply place the finger on the sensor, and
iGuard will then automatically capture the image of the finger for authentication.
This feature can be assigned to any user; however, the maximum number of users is 100.
The rest of the users can use ID plus Fingerprint for access.
Please note that users with poor fingerprint quality
should not use AutoMatch because this
option requires a higher quality of fingerprint image.
Follow the same procedure to toggle off this AutoMatch feature for the user.