IEMCA VIP80E-II, Руководство по эксплуатации и техническому обслуживанию

Страница: 85 / 108

6 - USE AND OPERATION VIP80E-II
EN
6 - Pag. 5 / 14
8 - Multifunction key
- Selects the next parameter.
- Moves the selection cursor rightwards
9 - Activates the "step-by-step" operating cycle:
performs a cycle step each time the key is
pressed. The flashing LED means the bar
feeder in semiautomatic mode is ready to carry
out the Step by Step mode.
10 - Multifunction key
- Allows scrolling the page downwards.
- Moves the selection cursor downwards.
- Decreases by one the value set in the date and
time programming mode.
11 - Allows the selection plate of the magazine bars
to be raised and lowered. The LED switched on
signals that the selection plate is low.
12 - Raises/Lowers the guide to V, the LED
switching on corresponds to the guide position
right down.
The key must be pressed until the movement
has finished.
If the key is released whilst the guide is being
raised, before the movement has been
completed, the guide will stop in its current
position.
Subsequent pressing of the key will take the guide back to its "zero" position (guide
lowered)
14 - Raises/Lowers the bar drop control devices. The LED switched on signals the bar drop
control devices are low.
15 - Raises/Lowers the bar pusher. The LED switched on signals the bar pusher is low.