IEMCA VIP80E-II, Руководство по эксплуатации и техническому обслуживанию

Страница: 20 / 108

EN
2 - TECHNICAL INFORMATION VIP80E-II
2 - Pag. 4 / 28
2.1.1 MAIN PARTS
A
I
M
L
D
G
O
E
C
P
N
F
B
H
8070_02_02_1
A Magazine; contains the bars to be loaded supporting the bar drop control devices.
B Bar selection table; through lowering onto the second bar all the previous bars present in
the magazine are blocked, leaving the first bar free.
C Bar drop control device unit; accompanies the bar onto the guide.
D Guide channel; this device drives the bar and centres it correctly into the lathe.
E Carriage unit; this device introduces the bar into the lathe.
F Bar pushing unit; this device pushes the bar inside the lathe until it has been completely
machined.
G Flag device; this device is activated by the arrival of the bar fore end.
H Bar feeding motor; thanks to a trapezoidal screw, motions are transmitted to the carriage
and to the bar pusher.
I Guide channel/magazine driving system: transmits the motion to the guide
channel/magazine.
L Piston for bar selection table; it starts the upstroke and downstroke of the selection table.
M Piston for bar drop control devices: controls the upstroke and downstroke of the bar drop
control devices.
N Piston for bar pushing unit: controls the upstroke and downstroke of the bar pushing unit.
O Handheld keyboard; sets the programming and activates the operative phases of the bar
feeder.