IEMAI HIGH-TEMPERATURE Series, Руководство по эксплуатации

Страница: 21 / 42

Print More Materials, All For Application
- 21 -
Step 4
1. Wait for return to zero
2. Click level to use auto leveling.
3. Wait for the machine to
automatically find 49 points to
build, then printing platform will
start printing
Step 5
1. To prevent the platform from
hitting the nozzle, it is necessary
to set the position of the
emergency stop limiter.
2. When the platform rises too
high so that the platform
squeezes into the nozzle, the
emergency stop limiter is
triggered to disconnect the
machine power and stop the
machine
Step 6
The mode setting is as follows:
1. After returning to zero, use a
working range of 0.1mm to control
the upward movement of the Z-axis,
and observe that the nozzle stops
moving when it touches the platform
2. Disconnect the plug of the
emergency stop limiter and test the
black and white interfaces using a
multimeter. Adjust the multimeter to
the buzzer setting, at this time, there
will be a sound. As shown in the
figure, the two test pens touch the
metal parts of the white and black
wires respectively. Adjust the limiter
up and down through the
fine-tuning screw and the fixing
screw to make the buzzer sound
3. After starting the machine, lower
the Z-axis and plug in the limiter