IEM Mobil-O-Graph NG Скачать руководство пользователя

Страница: 43 / 92

ypertension

anagement

oftware Client-Server

Mobil-O-Graph

, operating instructions, Rev. 5.1 10/2015, GmbH

4.9 Reading out measurements from the monitor

You can transmit data from the monitor to HMS CS.

Depending on the monitor, it will run through the following steps:

■

Mobil-O-Graph

End 24-hour monitoring, see 4.9.1,

Ending 24-hour monitoring with the Mobil-O-Graph

Connect HMS CS to monitor, see 4.9.2,

Connecting HMS CS to the Mobil-O-Graph

Import measurements from monitor, see 4.9.4,

Importing measurements from monitor into HMS CS.

■

Stabil-O-Graph

(optional)

Connect HMS CS to monitor, see 4.9.3,

Connecting HMS CS to the Stabil-O-Graph

Import measurements from monitor, see 4.9.4,

Importing measurements from monitor into HMS CS.

4.9.1

Ending 24-hour monitoring with the Mobil-O-Graph

Starting situation:

■

Monitor is on the patient’s arm and is switched on.

►

Switch the monitor off.

►

Take off the monitor from the patient.

4.9.2

Connecting HMS CS to the Mobil-O-Graph

►

Connect the switched-off monitor with the PC.

►

Start HMS CS.

4.9.3

Connecting HMS CS to the Stabil-O-Graph

►

Connect the switched-off monitor with the PC.

►

Start HMS CS.

4.9.4

Importing measurements from monitor into HMS CS

►

Start HMS CS.

If the program is set up for this, the window Patient list will appear (see 4.12.7,

Extras

). In this case, select

a patient (see 4.6.2,

Selecting existing patient

)

►

If using the

IR interface

cable

in the toolbar, click

If using Bluetooth, put your Mobil-O-Graph

into BT mode by holding down

and pressing

flashes on the display. Press

stops flashing and the buzzer sounds.

HMS CS checks whether the Patient ID is in the monitor.

If yes

If not

The question appears:

Assign measurements to

patient with ID number xxx?

►

Click

►

Select the required patient (see 4.6.2,

Selecting

existing patient

The measurements are imported into HMS CS and saved under that patient.

The question appears:

Delete Patient ID and measurements from the recorder?

Note:

It is normally sensible to delete these details from the monitor. When preparing the monitor for a “new”

patient, HMS CS indicates whether “old” measurements are still in the monitor.

If yes

If not

►

Click

►

Click

The window

Measurement series

appears.

4.9

Содержание Mobil-O-Graph NG





























































































Результаты поиска

Содержание Mobil-O-Graph NG

Отзывы:

Похожие инструкции для Mobil-O-Graph NG

Бренды по названию

Популярные бренды

IEM Mobil-O-Graph NG, Руководство по эксплуатации

Результаты поиска

Содержание Mobil-O-Graph NG

Отзывы:

Похожие инструкции для Mobil-O-Graph NG

Бренды по названию

Популярные бренды