IEM Mobil-O-Graph NG Скачать руководство пользователя

Страница: 42 / 92

Mobil-O-Graph

, operating instructions, Rev. 5.1 10/2015, GmbH

ypertension

anagement

oftware Client-Server

The time and type of reminder are imported from the monitor and displayed.

Setting the type of reminder

The monitor is able to remind the patient to measure BP in two ways:

■

By flashing light

■

By flashing light and buzzer.

Activating flashing light

and

buzzer:

►

Click the option button

Active

A tick appears.

Send reminder times to the monitor

►

Click

►

Confirm with

4.8.7

Ending device preparation

►

Click

The window

Prepare monitor

disappears.

►

Disconnect the physical connection between monitor and PC.

4.8.8

Starting 24-hour monitoring with the Mobil-O-Graph

After completion of device preparation in HMS CS, you can start monitoring the patient.

Starting situation:

■

The monitor should be disconnected from the PC.

►

Put the monitor on the patient (put on the cuff and connect it to the recorder).

►

Switch on the monitor.

Ensure that the monitor works as it should.

►

Press

for a

manual

measurement.

►

Wait for the first,

automatic

measurement.

If everything is in order, the patient can leave.

4.8.9

Starting measurement with the Stabil-O-Graph

After completion of device preparation in HMS CS, you can start monitoring the patient.

Starting situation:

■

The monitor should be disconnected from the PC.

►

Put the monitor on the patient (put on the cuff and connect it to the recorder).

Ensure that the monitor works as it should.

►

Press any key.

The time and date are displayed.

►

Press

for a measurement, to ensure that the monitor works as it should.

If everything is in order, the patient can leave.

4.8.7

Содержание Mobil-O-Graph NG





























































































Результаты поиска

Содержание Mobil-O-Graph NG

Отзывы:

Похожие инструкции для Mobil-O-Graph NG

Бренды по названию

Популярные бренды

IEM Mobil-O-Graph NG, Руководство по эксплуатации

Результаты поиска

Содержание Mobil-O-Graph NG

Отзывы:

Похожие инструкции для Mobil-O-Graph NG

Бренды по названию

Популярные бренды