IEI Technology NANO-4386A2 Скачать руководство пользователя страница 91

Страница: 91 / 212

NANO-4386A2 Motherboard

Page 73

VGA screen

Keyboard

Mouse

USB devices

LAN

Audio jacks

5.3 CPU, CPU Cooling Kit and DIMM Installation

WARNING:

A CPU should never be turned on without the specified cooling kit

being installed. If the cooling kit (heat sink and fan) is not properly

installed and the system turned on, permanent damage to the CPU and

other electronic components attached to the system may be incurred.

Running a CPU without a cooling kit may also result in injury to the

user.

The CPU, CPU cooling kit and DIMM are the most critical components of the

NANO-4386A2. If any of these components is not installed, the NANO-4386A2 cannot

operate.

5.3.1 Socket 479 CPU Installation

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

To install a socket 479 CPU onto the NANO-4386A2, follow the steps below:

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 91 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: