IEI Technology NANO-4386A2 Скачать руководство пользователя страница 131

Страница: 131 / 212

NANO-4386A2 Motherboard

Page 113

Disabled

BIOS is prevented from using the LBA mode control on

the specified channel.

Auto D

EFAULT

BIOS auto detects the LBA mode control on the specified

channel.

Block (Multi Sector Transfer) [Auto]

Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if the device

supports multi-sector transfers.

Disabled

BIOS is prevented from using Multi-Sector Transfer on the

specified channel. The data to and from the device occurs

one sector at a time.

Auto D

EFAULT

BIOS auto detects Multi-Sector Transfer support on the

drive on the specified channel. If supported the data

transfer to and from the device occurs multiple sectors at

a time.

PIO Mode [Auto]

Use the PIO Mode option to select the IDE PIO (Programmable I/O) mode program timing

cycles between the IDE drive and the programmable IDE controller. As the PIO mode

increases, the cycle time decreases.

Auto D

EFAULT

BIOS auto detects the PIO mode. Use this value if the IDE disk

drive support cannot be determined.

PIO mode 0 selected with a maximum transfer rate of 3.3MBps

PIO mode 1 selected with a maximum transfer rate of 5.2MBps

PIO mode 2 selected with a maximum transfer rate of 8.3MBps

PIO mode 3 selected with a maximum transfer rate of 11.1MBps

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 131 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: