IEI Technology NANO-4386A2 Скачать руководство пользователя страница 20

Страница: 20 / 212

NANO-4386A2 Motherboard

Page 2

1.1 NANO-4386A2 Overview

The NANO-4386A motherboard is an EPIC NANO form factor motherboard with an

embedded Intel® Celeron® M processor or a Socket 479 for Intel

Pentium

M/Celeron

M CPU. The Intel® 852GM Chipset and Intel® I/O Controller Hub 4 (ICH4) Southbridge

are integrated in the NANO-4386A. The NANO-4386A2 has a maximum front side bus

(FSB) frequency of 400 MHz, supports up to 1GB of dual channel 266 MHz DDR

SO-DIMM RAM and comes with VGA, LVDS, DVI, PS/2 keyboard/mouse and COM port

interfaces as well as a dual Intel® 82551ER or 82541P1 (GbE) chipsets. The

NANO-4386A2 supports up to two IDE hard disk drives, six USB 2.0 devices, Infrared

Data Association (IrDA) communications and expansion is via a PCI-104 interface. If RAID

support for the system is required, please contact an IEI sales representative, or send an

email to

[email protected]

1.1.1 NANO-4386A2 Features

Some of the NANO-4386A2 features are listed below.

RoHS compliant

Support for the following CPUs:

Embedded 600 MHz Intel® Celeron® M CPU with 512 KB L2 cache

Embedded 1 GHz Intel® Celeron® M CPU with zero cache

Socket 479 Intel

Pentium

M/ Celeron

Maximum FSB of 400 MHz

A 200-pin single channel 266 MHz DDR SO-DIMM supports up to 1GB of

memory

Ethernet:

Dual Intel® 82541PI GbE chipsets (Socket 479 model)

Dual Intel® 82551ER Ethernet (On-board CPU models)

Realtek ALC655 – AC’97 audio

Two Ultra ATA 100, Ultra ATA 66 or Ultra ATA 33 IDE HDDs supported

DVI display devices supported

Six USB 2.0 devices supported

Six COM ports supported

LVDS supported

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 20 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: